What You Can Do When Your MacBook Has Water Damage

Many things can happen during the day that can make a difference, either good or bad. And if you are a person who works with a MacBook, the last thing that you want to have happen is to have MacBook water damage. Water is the death of all computers. Once water gets inside the computer, it is just a matter of time before the entire system is affected. To minimize the damage to your MacBook, there are some things that you can do to help get things fixed.

What You Can Do If Your MacBook Has Water Damage

The following steps will help you know what to do if you spill water on your MacBook. These steps can help you save the laptop if it is not too late.

  1. The first thing you will want to do is cut the power. You will need to unplug the computer from the wall. This will keep you safe and from getting a severe shock if the water has penetrated the electrical circuits.
  2. Next, you will want to shut the power off on the computer. The screen and other circuits will stop operating once the power is shut off. This will help keep those components from shorting out and becoming damaged by the water. If you do not get the power down, there is a good chance the power control circuits are damaged. At this point, you may want to put the computer in a low power mode.
  3. Disconnect all the plugins that you have for your computer. Remove any USB drives and mouse sensors, so they are not damaged by the spill. This will also help you work with the laptop without a bunch of devices hanging off of it.
  4. Place the laptop on a dry towel. During this step, you will want to drain off any remaining water and dry every part that you can. Every part must be dry before moving on to the next part of drying everything out.
  5. Take the battery out if you have access to it. If not, you will need to remove the screws from the back and gently remove the battery inside the unit. Great care must be used at this juncture so you do not damage the battery or where it sits inside the computer.
  6. With the back cover open, take the time to use a towel to remove the rest of the water and moisture that you can find. You may be able to use cotton balls or cotton swabs to reach the areas your fingers cannot reach.
  7. Once you have dried everything, you can place the MacBook next to a fan for 48 hours. You want to get the unit upside down, so the water runs out the way it got in. The fan will help remove the water by forcing air over the area.

Once you have removed all the water, you can contact your local repair expert to inspect the damage. You may find that following the seven steps above saved your laptop from being recycled.

Leave a Comment